Load the paper face down in the tray. Open the duplex cover, and then turn both knobs counterclock- wise until they are horizontal to secure the duplex option to the right side cover. Be careful not to touch the surface of the image transfer belt or transfer roller. Page Remove the moist media and replace it appears. Konica Minolta Mc Pcl6 was fully scanned at: You are logged in as.

Uploader: Taudal
Date Added: 7 February 2015
File Size: 53.21 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 1905
Price: Free* [*Free Regsitration Required]

Remove the cap attached to the side of the waste toner bottle, and then attach it at the position shown in the illustration.

Close Tray 3 Tray 4. Symptom Cause Solution Media is The media is not cor- Remove the misfed media and reposi- misfeeding.

Konica Minolta magicolor 5450 User Manual

NONE is selected, no simulation profile is specified. Adobe makes no representation as to the adequacy of the Software for any particular pur- pose or to produce any particular result. Mnolta This chapter provides information to aid you in resolving printer problems you may encounter, or at least guide you to the proper sources for help.

This option requires basic OS understanding. This package supports the following driver models: Page This message Prepare the duplex option.


Slide the media guides against the edges of the envelopes. Using a coin, remove the screws on the left side cover. The printer, which has two memory slots, has a MB memory module already installed in one of the slots. Page 90 Slide the media guides to pro- vide more space between them. Using a screwdriver, remove the screw.

KONICA MINOLTA mc PCL6 – Free download and software reviews – CNET

In addition, it displays the current status of the printer, including any condition that needs your attention. Since you’ve already submitted a review for this product, this submission will be added as an update to your original review. Page 19 About the Software Press down on the center of the paper-lifting plate until the left and right locking tabs white lock into place.

Abuse handling may cause damage and void your warranty. There are particular operating systems known to have problems with Konica Minolta Mc Pcl6: Select the General tab.


Take off the top and bottom sheets of a ream of paper. Lower Feeder Unit You can install up to two optional lower feeder units Trays 3 and 4. The Cancel key was Make sure no one pressed the Knica pressed. Clean the media feed rollers by wiping them with a soft, dry cloth.


KONICA MINOLTA mc PCL6 Free Driver Download (Official) () –

Note The image is not fixed on the media before the fusing process. Page – Clearing a Media Misfeed from the Fuser Media matches the printer specifications.

Page Slide the media guides against the edges of the paper. Keep media on a flat, level surface in its original wrapper until it is time to load it. Printing can continue even after this message appears; however, since the print quality is reduced, the trans- fer belt unit should be replaced immediately.

Page Do not fan transparencies before load- ing them. Basic Tab Specify user information such pdl6 e-mail addresses and passwords Print on the back side of paper that has already been printed on! This option requires no OS understanding.

Author: admin