I just changed the battery it didn’t work Very important, what motherboard do you have? I know I’m not completely accurate in these things however all things are properly mounted on the mainboard and the CPU. So you have some ram and you dont know the specifaction of it and it is unbranded. It would beep if there was no memory installed. As you mention the memory, what kind is it?
|Date Added:||19 March 2008|
|File Size:||54.73 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
As you mention the memory, what kind is it? It’s just that stick, right?
Please post full specs. Then place the ram back.
At this point you should not have any ide cables or floppy drive cables. I know I’m not completely accurate in these things however all things are properly mounted on the mainboard and the CPU. I had a cd-rom attached that has been molested by my dog.
Msi Sound Drivers Ms
So by having the board out on a flat suface you can apply maximum force without bending the board. So you have some ram and you dont know the specifaction of it and it is unbranded. Then take everything out. The MB is of rev 1. However at first it beeped every 4 or 5 seconds for a second and didn’t shutdown.
Also changed PSU didn’t work either.
MSI MS-6734 MS 6734 MS6734 KM4M-L KM4M L AGP VGA 3xPCI IDE Sound VK105 OVP
The following error or errors occurred while this message: So I rebooted as you normally would with Windows and after a few minutes it freezed up again. It won’t go into boot so I don’t see how I could upgrade a bios. Please login or register. Sounds like an overheated processor to me.
It would beep if there was no memory installed.
It is good advice. I had a sudden freeze on my pc. You should try what I have said, if it works you will be happy.
So I soknd it you did not take everything out. I pulled out all imaginable cables and cards so only the proc, mem is on it and still nothing I pulled the power plug out of it waited a few seconds and tried again. Just thinking about that CD device you tried to feed the dog: Connected the power suply still the soknd When I start it up it beeps and shutsdown. The battery is a very good ‘guess’. By taking everything out you can check for physical damage also get rid of some dust.
The reason I said that is because maybe something is loose or damaged. Ok, so before it stopped working did you do anything which could have resulted in this? Once you have done that blow some dust off, do not use a brush.
Home Help Search Login Register. I just pulled out the power and ide cable when the pc was turned of nothing else has been done to it Very important, what motherboard do you have?